| ... | @@ -66,6 +66,6 @@ https://gitlab.citic.udc.es/lia2-publico/g4s/-/wikis/fw/firmware.bin) but it is |
... | @@ -66,6 +66,6 @@ https://gitlab.citic.udc.es/lia2-publico/g4s/-/wikis/fw/firmware.bin) but it is |
|
|
|
|
|
|
|
If something fails and the FreeDSM stays in **SAFEBOOT** mode (shown in red on the web interface), simply repeat the process for the firmware flashing. Check that you are using the correct **firmware.bin**, downloaded from this page.
|
|
If something fails and the FreeDSM stays in **SAFEBOOT** mode (shown in red on the web interface), simply repeat the process for the firmware flashing. Check that you are using the correct **firmware.bin**, downloaded from this page.
|
|
|
|
|
|
|
|
- **Second, upload the new Berry script (file autoexec.bec)**: Main Screen, selecting "Consoles" or "Tools" -> "Manage File System" (the same used for the first step), select the new "autoexec.bec" using the upper left button and select "Start upload".
|
|
- **Third, upload the new Berry script (file autoexec.bec)**: Main Screen, selecting "Consoles" or "Tools" -> "Manage File System" (the same used for the first step), select the new "autoexec.bec" using the upper left button and select "Start upload".
|
|
|
|
|
|
|
|
In the main menu, select "Restart". The FreeDSM will reboot and you will see the new version informationin the main screen (remember, firmware and script must match in the first two numbers of the version). |
|
In the main menu, select "Restart". The FreeDSM will reboot and you will see the new version informationin the main screen (remember, firmware and script must match in the first two numbers of the version). |
